Solar Quotes Australia Wide
Hybrid & Off Grid
Solar Systems
SOLAR QUOTES

Call Jason Eldridge
0466 960 552
8am-5pm Mon-Fri EST
Call Now

Victron MultiPlus 48/1600/20-16

$1,569.00

Victron MultiPlus 230-volt AC, 48-volt 1600-VA inverter charger with 20-amp battery charging and 16-amp AC transfer capability compatible with all batteries including Lithium.

The MultiPlus is an inverter and charger combination supporting easy installation by way of the Victron MK3-USB interface cable, including the following features:

  • True sine wave inverter
  • Adaptive charging
  • Hybrid PowerAssist
  • PowerControl
  • Multiple system integration

The PowerAssist feature will enable the unit to supplement the alternative source. The unit will compensate supply from the battery at times of insufficient power and when no longer required, the excess power will be used for charging. It is therefore no longer necessary to size a generator on the maximum peak load. Use the most efficient size generator instead.

Should there be a grid failure the UPS capability of the inverter is automatically activated. With some units having the ability to enable 6 Multis operating in parallel there is potentially close to uninterrupted and unlimited power.

If three phase power is required, then multiple units can be connected in parallel and configured with the combinations delivering up to 75KW/90 kVA inverter and more than 2000 Amps charging capacity.

Configuring parallel and three-phase systems is made simple with the VEConfigure software tool which allows the installer to put components together without any hardware changes or dipswitches, using standard products.

Monitoring and configuring functionality offers seamless control, both on-site and off-site.

For higher power applications you may consider the larger MultiPlus or the Quattro range both of which bring the possibility of unlimited power with the Multiple system integration functionality.

 

Victron MultiPlus 230-volt AC, 48-volt 1600-VA inverter charger with 20-amp battery charging and 16-amp AC transfer capability compatible with all batteries including Lithium

 

  • SKU:
    PMP482160000
  • AC: 230V
  • INVERTER: 1600VA
  • DC: 48V
  • Charger: 20A
  • Manufacturer: Victron
  • MPN: PMP482160000
  • Shipping Weight: 11.50kg

 

 

 

Other features include:

  • True sine wave inverter
  • Adaptive charging
  • Hybrid PowerAssist
  • PowerControl
  • Multiple system integration

 

Victron Grid parallel topology with MPPT solar charge controller

PowerControl is a valuable feature, especially when handling limited power such as generator supply. When the Quattro draws significant current from the generator or shore side supply, set the maximum current limit on each AC input. Considering other loads, the Quattro adapts so that only surplus power is used for charging, thus preventing the generator or mains supply from being overloaded.

The PowerAssist feature will enable the device to supplement the incoming power with power from the battery. Any excess power is used for charging. It is therefore no longer necessary to size a generator on the maximum peak load. Use the most efficient size generator instead.

The advanced ‘adaptive charge’ software fine-tunes the three-stage automatic process to suit the battery condition and how the battery is being used, preventing damage and ensuring less maintenance is required. A fourth stage charge [also called the Storage mode] delivers a longer period of float charging. In addition, the Multiplus will charge a second battery using an independent trickle charge output.

Should there be a grid failure the UPS capability of the inverter is automatically activated. With some units having the ability to enable 6 Multis operating in parallel there is potentially close to uninterrupted and unlimited power.

If three phase power is required, then multiple units can be connected in parallel and configured with the combinations delivering up to 75KW/90 kVA inverter and more than 2000 Amps charging capacity.

Configuring parallel and three-phase systems is made simple with the VEConfigure software tool which allows the installer to put components together without any hardware changes or dipswitches, using standard products.

Monitoring and configuring functionality offers seamless control, both on-site and off-site.

On-site monitoring and control

Internal Venus GX. Several options are available: Battery Monitor, Digital Multi Control Panel, Color Control Panel, Bluetooth  laptop or computer.

(VIC.PMP482305010)

 

Multiplus II Specifications

Additional information

Weight 17050 g

Reviews

There are no reviews yet.

Be the first to review “Victron MultiPlus 48/1600/20-16”

Your email address will not be published. Required fields are marked *

− 7 = 1

This site uses Akismet to reduce spam. Learn how your comment data is processed.